Unknown Rules Of Cricket

Hey guys, welcome to cricket info, Cricket has become a favorite sport of all times.  We all know that everyone is fond of cricket, from children to young people and from the country to abroad, although there are some rules for this too, today we will talk about the rules of cricket in this article.

  1. Rules Of Cricket
  2. Cricket Rules in History
  3. Current Cricket Rules
  4. Player
  5. Wicket Keeper
  6. Fielder
  7. Ways to Score Runs in Cricket
  8. Umpire
  9. Bowling Method
  10. Bat
  11. Wicket
  12. Game structure

Also Read:

History of Cricket

Rules Of Cricket

history of cricket, rules of cricket,

Marylebone is a set of rules established by the rules of the Cricket Club (MCC) that explain the rules of cricket around the world to ensure fairness and uniformity.

There are currently rules of cricket 42 laws that provide information on how to play the game, including all aspects of how a team wins and the preparation and maintenance of a batsman’s pitch.

The rules of cricket the game around the world are changed only after consultation with the International Cricket Council (ICC).  The ICC is the governing and regulatory body of cricket competitions worldwide.

rules of Cricket is one of the few sports for which regulatory principles are referred to as ‘laws’ rather than ‘rules’ or ‘rules of cricket’.  However, laws may be different for supplemental and/or special competitions.

Rules of Cricket in History

It expanded into the rules of cricket Britain in the eighteenth century as a speculative sport that was particularly popular among British elites.  The largest rules of cricket were also formulated in terms of regulating the game of big money bets.

There are other references to the rules of cricket amended by “Star and Garter in various rules of cricket clubs, especially Pal Male” in 1755, followed by “Star and Garter in 1774, the wealthy of Kent, Hampshire, Surrey, Sussex, Middlesex, and London.  And the amendment to the rules was made by “a committee of gentlemen”.

A printed form of the rules of cricket was published in 1775 and another amendment to the law was made in 1786, a similar one in Kent, Hampshire, Surrey.  The body was made by., Sussex, Middlesex, and London.

In 1829 the length of the stump was increased from 24 to 27 inches (610 to 690 millimeters) and the length of the gills was increased from 7 to 8 inches (180 to 200 millimeters), once again to help bowlers.  The thickness of the stump was first mentioned.  On 19 May 1835, a new code of rules was approved by the MCC Committee and on 21 April 1884, another code was approved. 

For the first time, the number of players was formalized in the 1884 rules (eleven players in a team) and for the first time, the size of the ball was also formalized.  A follow-on rule was introduced.  This was done in response to a problem in which a team needed two of its opposing teams to win a game.

A team that has batted first and made a full catch by scoring too many runs in that match will have to wait until they are dismissed for the second time before they take the opposition team to second.  Could try to bar outside.  Since cricket is a limited time game, it means that the team that dominates their opposing team can be forced to finish the game rather than win the game. 

The initial follow-up rule was faulty because it required a follow-up when a team lagged behind.  A team intentionally being able to bowl at the end on a deteriorating pitch could have lost its last wicket of the first innings.  The follow-up rule was later changed to allow any team that is far ahead of its opposition team and has the option of implementing it or not.

On 7 May 1947, a new code was approved by the MCC.  After several minor amendments to the 1947 code in 1979, a new code was approved at a special general meeting of the MCC on 21 November.  This is known as the 1980 code.  Among other changes, metric units are now used after Imperial units in specialties.

A second version of the 1980 Code was prepared in 1992.  In 2000, a new code, which included a preamble defining the spirit of cricket for the first time, was approved on 3 May.  This code was rewritten in simple English and is far more logical than the previous code.  The length of an over was officially standardized over six balls for all matches, although in practice this was the case 20 or so years ago.  In 2003, a second version of the 2000 code was drafted, incorporating amendments arising from the enactment of the 2000 code.

Current Rules of Cricket

To further the rules of cricket, the International Cricket Council has implemented “standard playing conditions for Test matches” and “one-day international standard playing conditions for matches”.  Similarly, every rule of cricket playing country has enforced the terms of the game to control domestic cricket. 

These rules of cricket provide for one-day or limited-overs cricket (including Twenty20), stipulating that the number of innings per team will be one or two and each innings is limited to maximum overs or maximum time periods.  can do.

Eight amendments to the rules of cricket were made on 30 September 2010 and came into force from 1 October 2010 to deal with rare cases of poor lighting, toss, cricket spirit, practice sessions, agility, and dismissal in fielding.


 A cricket team consists of eleven players including a captain.  Outside of official competitions, the team may agree to have more than eleven players on one side, although no more than eleven players may field.

In rules of cricket, a substitute player can be replaced by an injured fielder.  However, an option player cannot play batting, bowling, wicket keeping, or captaincy.  In this case, if the original player recovers, he can return.  A batsman who cannot score runs can have a runner for himself who completes the run.

Wicket Keeper

The wicket-keeper is the designated player from the bowling team who is authorized to stand behind the batsman’s stumps.  He is the only player from his team who is allowed to wear gloves and outside leg guards. The wicket-keeper is the designated player from the bowling team who is authorized to stand behind the batsman’s stumps.

He is the only player from his team who is allowed to wear gloves and outside leg guards. The wicket-keeper is the designated player from the bowling team who is authorized to stand behind the batsman’s stumps.  He is the only player from his team who is allowed to wear gloves and outside leg guards.


All eleven cricketers are fielders on the bowling side.  Fielders are deployed on the field to catch the ball, to stop runs and fours, and to catch the ball or dismiss the batsman as a runout.

Ways to Score Runs in Cricket

The rules then discuss how runs can be scored and how one team can beat the other team. Runs are made when two batsmen run to each other’s ends on the pitch.  Multiple runs can be scored from a ball. There are three ways in which rules of cricket can be scored.

  1. Running between the wickets
  2. Four run
  3. Sixes
  4. Extra Runs

Running between the wickets

There are stumps on either side of the pitch and one batsman stands on either side, the batsman who plays hits the ball and both batsmen run towards the front stump to get runs.  At this time, the bowling team tries to catch the ball and bumps the ball from the stumps before the batsman reaches the stumps, or by holding the ball as fast as possible to allow the batsman to score at least.

Four run

When the batsman hits the ball and the ball crosses the prescribed limit, it runs on the ground, then it is called four fours.


When the batsman hits the ball and crosses the boundary without eating air, it is called six or 6.

Extra Run

Also, due to the wrong ball of the bowler, the front team is given one run on each wrong ball.


The umpire game consists of two umpires who enforce the rules, make all the necessary decisions, and pass their decisions to the scorer.  Although not required under the rules of cricket, high-level rules of cricket use a third umpire (located off the field and available to assist the on-field umpire) under the specific playing conditions of a particular match or tournament.  can go.

Bowling Methods

  1. No ball
  2. Dead ball
  3. Wide ball
  4. Bye
  5. Leg bye

Ball Cricket Ball has a circumference of 8 13/16 and 9 inches (22.4 cm and 22.9 cm) and weighs from 5.5 to 5.75 ounces (155.9 grams and 163 grams).  Only one ball is used until it is lost when the same ball is replaced with the same luge.  This is changed at the beginning of each innings and also at the request of the fielding side when there is a new place of a particular number of overs (80 Tests, 34 in ODIs).

No Ball

A ball can be a no-ball for several reasons: if the bowler bowls from the wrong place;  Or if he straightens his elbow while throwing the ball;  Or if bowling is dangerous;  Or if the ball bounces or slips more than twice before reaching the batsman;  Or if fielders are standing in illegal places.  A no-ball batting adds an extra run to the team’s score, other than that runs are scored on it and the batsman is out via run-out, or by handling the ball, hitting the ball twice, or on the field.  is.  It cannot be dismissed from any no-ball except interruption.

Dead Ball

The ball comes into play when the bowler starts his run and it becomes useless when the ball ceases all activity.  Once the ball goes idle, no runs can be scored and no batsman can be dismissed.  The ball becomes useless for several reasons, usually when a batsman is out, when a four is hit or when the ball finally reaches the bowler or wicketkeeper.

Wide Ball

umpire calls a ball “wide” if in his opinion the batsman does not have a fair chance to score from that ball.  A ball is called wide when the bowler throws a bouncer that goes over the batsman’s head.  Apart from any other run on a wide ball, it adds an extra run to the batting team’s score and the batsman cannot be dismissed on a wide ball, except he is run out or trumped out.  Go or he cannot get away with handling the ball, hitting his wicket, or obstructing the field.


A “Bye” is where a ball that isn’t a no-ball or wide passes the striking batsman and runs are scored without the batsman hitting the ball

Leg bye

A “leg by” is where a batsman is hit and scored, but not a bat and the ball is no ball or wide.  However, no runs can be scored if a batsman is not attempting to play a shot or if he is avoiding the ball.


The length of the bat does not exceed 38 inches (97 cm) and its width does not exceed 4.25 inches (10.8 cm).  The hand or glove holding the bat is considered part of the bat. 

The heavy metal phenomenon, a highly publicized marketing effort by Dennis Lillee that brought an aluminum bat during an international match, followed by the bat blade provided in the rules, was essentially made of wood.  Must have happened


The wicket consists of three wooden stumps with a length of 28 inches (71 cm).  The stumps are placed near the batting crease with equal distance between each stump.  They are placed such that they remain 9 inches (23 cm) wide.  Two wooden balls are placed above the stump. 

The bell should not be more than 0.5 inch (1.3 cm) above the stump and 4 5⁄16 inches (10.95 cm) long for men’s cricket.  Length is also specified for the cylindrical tube and stopper of the Gilli.  Wicket and Gilli have different specifications for junior cricket.  Umpires can deliver gills if circumstances are inappropriate

Game structure

  1. End of game.  The game begins after an interval with the umpire’s call to “play” and a session ends with “time”.  The final hour of a match consists of at least 20 overs, where some time is extended to include 20 ove. For a game of five or more days, the team batting first must be ahead by at least 200 runs to apply follow-on;  150 it for a three- or four-day game;  100 runs for a two-day game;  There should be 75 runs for a one-day match.  The length of the game is actually determined by the number of days left of the game remaining from the time the game began.
  2. In a two-innings game, both sides bat until forced to follow-on (Rule 13).  An innings ends after all the batsmen have been dismissed, if no other batsman is fit to play, the innings is declared or his right is lost by the batting captain or when there is an agreed time or over.  limit reached.  The captain who wins a coin toss decides to bat or bowl first.
  3. End of game.  The game begins after an interval with the umpire’s call to “play” and a session ends with “time”.  The final hour of a match consists of at least 20 overs, where some time is extended to include 20 overs if needed.


Six overs are bowled except for wide and no-balls in an over.  Over overs are bowled from opposite ends of the pitch.  A bowler cannot bowl two consecutive overs.

Exit Procedures

  1. Appeals should be dismissed to the fielding side in all cases, including obvious cases such as boldness.  However a batsman who is clearly out will usually leave the pitch without waiting for an appeal or an umpire’s decision.
  2. There are several ways to get out when the wicket is dropped.  This means that the wicket has been hit by the ball, or the batsman or the hand in which the fielder is holding the ball is on the wicket and at least one Gilli has been dropped.
  3. The batsman can be run out or stumped if he is out of his place.  The batsman is in his place, but if he or some part of his bat is on the ground behind the popping crease.  If both batsmen are in the middle of the pitch when the wicket falls, the batsman close to that end is out.

Ways to Out

  1. Bold
  2. Timed Time
  3. Catch Out
  4. Handling the Ball
  5. Hit the Ball Twice
  6. Hit Wicket
  7. Leg Before Wicket
  8. Field
  9. Run Out
  10. Stamped


A batsman is out in that situation if a ball thrown by the bowler drops his wicket.  It is irrelevant that the ball has touched the bat, gloves, or any part of the batsman before proceeding to bring the wicket down, although it may not have touched another player or umpire before doing so.

Timed Time

A new incoming batsman must be ready to face the ball within 3 minutes of the outgoing batsman being out (or must be at the crease with his partner to face a ball), otherwise, the incoming batsman is out will go.

Catch Out

 If a ball hits the bat or the hand holding the bat and is then caught by the opposition player within the field of play before the ball bounces, the batsman is out.

Handling the Ball

If a batsman deliberately handles a ball with a hand that does not touch the bat without the consent of the opposition team, he is out.

Hit the Ball Twice

If a batsman hits the ball twice for the purpose of saving your wicket or with the consent of the opposition team, then he is out.

Hit Wicket

If a bowler enters the field of throwing his ball and when the ball is in the middle of the game, a batsman drops the wicket with his bat or his body, he is out.  The striker is also dismissed as a hit wicket when he drops a wicket from his bat or his body while running for the first run.  The “body” also includes clothes and batter equipment.

Leg before Wicket (LBW)

If the ball hits the batsman without first hitting the batsman, but if the batsman is not there, the ball will hit the wicket and the batsman will be out if the ball does not stick on the pitch towards the back of the wicket.  However, the ball is not out if the batsman feels outside the line of the off-stump and a stroke was attempted by the batsman.


Interrupting the field If a batsman intentionally interrupts the opposition team by word or activity, he is out.

Run Out

A batsman is out when any part of his bat or player falls behind the popping crease at any point during the ball’s game and his wicket is clearly dropped by the opposition team.


A batsman is dismissed in a situation when the batsman is out of his crease and is not trying to take a run and the wicket-keeper downs the wicket.

1 thought on “Unknown Rules Of Cricket”

Leave a Comment